Dell PowerEdge M420 Reference Manual page 1504

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

port — UDP port of the host to use. The default is 162. (Range: 1-65535.)
filtername — A string that is the name of the filter that define the filter for
this host. If unspecified, does not filter anything. (Range: 1-30 characters.)
Default Configuration
Default configuration is 3 retries and 15 seconds timeout.
Command Mode
Global Configuration mode
User Guidelines
The username can include any printable characters except a double quote or
question mark. Enclose the string in double quotes to include spaces within
the key. The surrounding quotes are not used as part of the key. The CLI does
not filter illegal characters but may accept entries up to the first illegal
character or reject the entry entirely.
Example
The following example identifies an SNMPv3 host.
console(config)# snmp-server v3-host 192.168.0.20
The following example shows the syntax of the no snmp-server host ip-
address command.
console(config)#no snmp-server host 1.2.3.4 ?
informs
traps
1500
SNMP Commands
Sends SNMP informs to this host.
Sends SNMP traps to this host.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents