Debug Igmpsnooping - Dell PowerEdge M420 Reference Manual

Syntax
debug dot1x packet [ receive | transmit ]
no debug dot1x packet [ receive | transmit ]
Default Configuration
Display of dot1x traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug dot1x packet

debug igmpsnooping

Use the debug igmpsnooping to enable tracing of IGMP Snooping packets
transmitted and/or received by the switch. IGMP Snooping should be enabled
on the device and the interface in order to monitor packets for a particular
interface.
Syntax
debug igmpsnooping packet [ receive | transmit ]
no debug igmpsnooping packet [ receive | transmit ]
Default Configuration
Display of IGMP Snooping traces is disabled by default.
Command Mode
Privileged EXEC mode.
1443
Serviceability Tracing Packet Commands