Dell PowerEdge M420 Reference Manual page 1556

supported cardtype) indicating the type of card being preconfigured in the
specified slot. The card index is a 32-bit integer. If a card is currently present
in the slot that is unconfigured, the configured information will be deleted
and the slot will be reconfigured with default information for the card. The
supported card types are:
• PowerConnect 7024
• PowerConnect 7024P
• PowerConnect 7024F
• PowerConnect 7048
• PowerConnect 7048P
• PowerConnect 7048R
• PowerConnect 7048R-RA
• CX4 Expansion Card
• 10GBaseT Expansion Card
• SFP+ Expansion Card
Use the no form of the command to return the unit/slot configuration to the
default value.
Syntax
unit/slot cardindex
slot
unit/slot
no slot
unit/slot — The slot identifier of the slot.
•
cardindex — The index into the database of the supported card types
•
(see show supported cardtype) indicating the type of card being
preconfigured in the specified slot. The card index is a 32-bit integer.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
1552
System Management Commands