Dell PowerEdge M420 Reference Manual page 1492

Parameter
pim
poe
snmp authentication Enable snmp authentication traps.
spanning-tree
stack
vrrp
Default Configuration
SNMP authentication, link, multiple-user, spanning-tree, dot1q, mac lock
violation, and ACL traps are enabled by default.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the options for the snmp-server enable traps
command.
console(config)#snmp-server enable traps ?
<cr>
acl
all
authentication
traps when
dvmrp
link
Up/Down trap flag.
1488
SNMP Commands
Description
Enable pim traps (pim-sm and pim-dm).
Enable poe traps.
Enable traps on topology changes.
Enable stack firmware synchronization traps.
Enable vrrp traps.
Press enter to execute the command.
acl
Enable/Disable all Traps.
To enable the device to send SNMP
authentication fails.
dvmrp
Enable/Disable switch level Link