Dell PowerEdge M420 Reference Manual page 1521

level
Use the level command in Logging mode to specify the severity level of syslog
messages. To reset to the default value, use the no form of the command.
Syntax
level
level
no level
Parameter Description
Parameter
level
Default Configuration
The default value for
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the
command can be executed to set the severity level for syslog messages.
Example
The following example sets the syslog message severity level to alert.
console(config-logging)#level alert
logging cli-command
Use the logging cli-command in Global Configuration mode to enable CLI
command logging.
Description
The severity level for syslog messages. (Range: emergency, alert,
critical, error, warning, notice, info, debug)
level
is info.
Syslog Commands
1517