Debug Ip Mcache - Dell PowerEdge M420 Reference Manual

Default Configuration
Display of IGMP traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug ip igmp packet

debug ip mcache

Use the debug ip mcache command for tracing MDATA packet reception and
transmission. The receive option traces only received data packets and the
transmit option traces only transmitted data packets. When neither keyword
is used in the command, then all data packet traces are dumped. Vital
information such as source address, destination address, packet length, and
the interface on which the packet is received or transmitted is displayed on
the console. Use the "no" form of this command to disable MDATA tracing.
Syntax
debug ip mcache packet [ receive | transmit ]
no debug ip mcache packet [ receive | transmit ]
Default Configuration
Display of MDATA traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
1446
Serviceability Tracing Packet Commands