Show Logging - Dell PowerEdge M420 Reference Manual

Parameter Description
Parameter
port
Default Configuration
The default port number is 514.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the
command can be executed to set the port number for the server.
Example
The following example sets the syslog message port to 300.
console(config-logging)#port 300

show logging

Use the show logging command in Privileged EXEC mode to display all
logging information, including auditing status.
Syntax
show logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
1528
Syslog Commands
Description
The port number for syslog messages. (Range: 1-65535)