Logging File - Dell PowerEdge M420 Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example limits messages logged to the console based on
severity level "alert".
console(config)#logging console alert

logging file

Use the logging file command in Global Configuration mode to limit syslog
messages sent to the logging file based on severity. To cancel the buffer, use
the no form of this command.
Syntax
severity–level-number
logging file [
no logging file
Parameter Description
Parameter
severity–level–number
Default Configuration
The default severity level is error.
1524
Syslog Commands
type
| ]
Description
(Optional) The number or name of the desired severity
level. Range:
[ | ]
0 emergencies
[ | ]
1 alerts
[ | ]
2 critical
[ | ]
3 errors
[ | ]
4 warnings
[ | ]
5 notifications
[ |
6 informational
[ | ]
7 debugging
]