Show Sflow Polling - Dell PowerEdge M420 Reference Manual

Receiver Owner
Index String
-------- -------- ---------- ------------ ----- --------------------------
2

show sflow polling

Use the show sflow polling command to display the sFlow polling instances
created on the switch.
Syntax
rcvr-index
show sflow
interface-list
]
rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
•
interface-list — The list of interfaces to poll, in unit/slot/port format.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
Poller Data The sFlowDataSource (unit/slot/port) for this sFlow sampler. This
Source agent will support Physical ports only.
Receiver Index The sFlowReceiver associated with this sFlow counter poller.
Poller Interval The number of seconds between successive samples of the counters
associated with this data source.
Example
console# show sflow 1 polling
Time out Max Datagram Port
Size
0 1400
polling [{gigabitethernet | tengigabitethernet}
IP Address
6343 0.0.0.0
Sflow Commands
1469