Ping - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

User Guidelines
Nonstop forwarding allows the forwarding plane of stack units to continue to
forward packets while the control and management planes restart as a result
of a power failure, hardware failure, or software fault on the stack
management unit.
Example
console(config)#nsf

ping

Use the ping command in User EXEC mode to check the accessibility of the
desired node on the network.
Syntax
ping [ ip | ipv6 ]
size
size
]
ipaddress — IP address to ping (contact).
hostname — Hostname to ping (contact). (Range: 1–158 characters). The
command allows spaces in the host name when specified in double quotes,
even though host names may only consist of letters, numbers and the
hyphen character.
count — Number of packets to send (Range: 1–15 packets).
interval — The time between Echo Requests, in seconds (Range: 1–60
seconds).
size — Number of data bytes in a packet (Range: 0–65507 bytes).
Default Configuration
The default count is 4.
The default interval is 3 seconds.
The default size is 0 data bytes.
Command Mode
User EXEC mode
1548
System Management Commands
ipaddress
hostname
|
count
[ repeat
] [ timeout
interval
] [

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents