Aps Events - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

aps events

Syntax
Release Information
Description
Options
Mode
114
aps events list [ list ]*
no aps events
Command introduced in JunosE Release 7.2.0.
Enables line modules to deliver APS events to the necessary SNMP traps. You can
configure notification for specific events. The no version disables the delivery of APS
events from line modules to SNMP traps.
list—One of the following APS events:
all—Configures notification of all APS events
channel-mismatch—Configures notification of APS channel mismatches
feplf—Configures notification of APS far-end protection line failures
mode-mismatch—Configures notification of APS mode mismatches
psbf—Configures notification of APS protection signal byte failures
switchover—Configures notification of APS switchovers
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Global Configuration
Copyright © 2010, Juniper Networks, Inc.