Adjustment-Factor - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
adjustment-factor
Syntax
Release Information
Description
Options
Mode
106
adjustment-factor dslType value
no adjustment-factor dslType
Command introduced in JunosE Release 9.1.0.
Configures an adjustment factor that is applied globally to the ANCP-reported
downstream and upstream data rate for all subscribers of a particular DSL line type. The
adjusted data rate results in an accurate QoS shaping rate. The no version restores the
default, wherein the rate is not adjusted.
dslType—Type of DSL subscriber line for which the data rate is adjusted by the specified
QoS adjustment factor: adsl1, adsl2, adsl2+, vdsl, vdsl2, or sds
value—QoS adjustment factor applied to upstream or down stream data rates for the
DSL type; a percentage in the range 1–100
L2C Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
