Controlling The Modem; Remote Access To Your System Desktop; Remote Desktop - NEC Express5800/320Ma Administrator's Manual

Controlling the Modem

!
Use the following procedure to change the power state of the modem while the system
remains online. Otherwise, shut down the system and remove the power cords, as
described in the Express5800/320Ma: Operation and Maintenance Guide.
Powering the modem on or off while the system is online
1. In ftSMC, expand ftServer (Local) and ftServer Call Home Modem.
2. Refer to the PowerState property in the details pane, or the state of the power
(green) LED on the modem, to verify that the power is on or off.
3. If the modem power is on, select Initiate BringDown to turn it off. If the modem
power is off, select Initiate BringUp to turn it on.

Remote Access to Your System Desktop

You can remotely access your system's Windows desktop in different ways, depending
on how your system is set up.
access to the Windows desktop from a remote computer.

Remote Desktop

Microsoft Remote Desktop is installed by default on your system. However, it is not
enabled by default.
To enable Remote Desktop
1. Right-click My Computer and select Properties.
2. In System Properties, click the Remote tab.
3. Select the check box under Remote Desktop to enable users to connect remotely
to the computer.
4. The Remote Sessions dialog box will appear, stating that some local accounts
might not have passwords. Click OK.
C A U T I O N
When you replace or install a modem, you must turn
power to the modem connector off to prevent damage to
the modem and the system.
Remote Desktop and VTM console
Operating and Monitoring Your System

Controlling the Modem

enable remote
2-5