Set Backlight To Automatically Turn Off - YASKAWA HV600 Manual

3.
Push or
4.
Push or
5.
Push or
6.
Push or
7.
When you complete changing the value, push
The procedure to set the sampling time is complete.
◆

Set Backlight to Automatically Turn OFF

You can set the backlight of the keypad screen to automatically turn OFF after a set length of time since the last key
operation on the keypad. The procedure in this section shows how to turn ON and turn OFF the backlight.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
to select [Diagnostic Tools], then push
to select [Data Logger], then push
to select [Log Sampling Interval], then push
to select the digit, then push
, push (Back) to show [Home] on
.
(Setup).
.
or to change the value.
.
.
3.6 Keypad Operation
555
3