YASKAWA HV600 Manual page 50

1.9 F: Options
No.
Name
(Hex.)
F7-38 Dynamic In Param 6 for
CommCard
(037A)
F7-39 Dynamic In Param 7 for
CommCard
(037B)
F7-40 Dynamic In Param 8 for
CommCard
(037C)
F7-41 Dynamic In Param 9 for
CommCard
(037D)
F7-42 Dynamic In Param 10 for
CommCard
(037E)
50
V/f OLV/PM OLV/PM EZOLV
Sets Input Assembly 166 when you use an Ethernet/IP option. The drive sends the values
from the MEMOBUS/Modbus address registers stored for each parameter to Input
Assembly 166. The drive returns the default register value for the option card when the
MEMOBUS/Modbus address is 0 and the value sent to Input Assembly 166 is not defined.
V/f OLV/PM EZOLV OLV/PM
Sets Input Assembly 166 when you use an Ethernet/IP option. The drive sends the values
from the MEMOBUS/Modbus address registers stored for each parameter to Input
Assembly 166. The drive returns the default register value for the option card when the
MEMOBUS/Modbus address is 0 and the value sent to Input Assembly 166 is not defined.
V/f OLV/PM OLV/PM EZOLV
Sets Input Assembly 166 when you use an Ethernet/IP option. The drive sends the values
from the MEMOBUS/Modbus address registers stored for each parameter to Input
Assembly 166. The drive returns the default register value for the option card when the
MEMOBUS/Modbus address is 0 and the value sent to Input Assembly 166 is not defined.
V/f OLV/PM EZOLV OLV/PM
Sets Input Assembly 166 when you use an Ethernet/IP option. The drive sends the values
from the MEMOBUS/Modbus address registers stored for each parameter to Input
Assembly 166. The drive returns the default register value for the option card when the
MEMOBUS/Modbus address is 0 and the value sent to Input Assembly 166 is not defined.
V/f OLV/PM EZOLV OLV/PM
Sets Input Assembly 166 when you use an Ethernet/IP option. The drive sends the values
from the MEMOBUS/Modbus address registers stored for each parameter to Input
Assembly 166. The drive returns the default register value for the option card when the
MEMOBUS/Modbus address is 0 and the value sent to Input Assembly 166 is not defined.
Description
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Default
Ref.
(Range)
0 276
0 276
0 276
0 276
0 276