YASKAWA HV600 Manual page 405

Default (o1-82 = 0)
Note:
• When o1-80 = 0 [OFF], drive Faults, oFAxx, or CPFs do not trigger a full-screen message to display.
• When o1-81= 0 [Alarm Screen Display = OFF], drive Alarms do not trigger a full-screen message to display.
• When o1-82 = 0 [Message Screen Display = OFF], drive Messages do not trigger a full-screen message to display. The keypad will
continue to show limit errors and other informative screens.
• You cannot select the display method of oPExx [Parameter Setting Errors]. The keypad shows oPExx errors as full screen displays and
status monitor displays. Active oPExx errors have display priority over active faults and alarms.
Status Monitor Display
When o1-40 = 0 [Home Screen Display Selection = Custom Monitor], the keypad will show the Status Monitor on
the second and third lines of the HOME screen.
• The second line shows HOA status and other information, for example:
– Fault/Alarm/oPExx/oFAxx codes
– MEMOBUS Multiplex drive status
– Information Text status
• The third line shows information texts, for example:
– Pre-Charge messages
– Sleep messages
– MEMOBUS Multiplex Staging and De-staging messages
It will also show Information Text for Sequence Timer status.
Table 2.63 shows the examples of Status Monitor display during normal operation.
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Table 2.62 Example of Message Displays for Pre-Charge
2.11 o: Keypad-Related Settings
Full Screen Message (o1-82 = 1)
2
405