YASKAWA HV600 Manual page 271

When NetRef or ComRef are the frequency reference source, the multi-step speed reference (2-step speed through 16-
step speed references) and the Jog Frequency Reference (JOG command) are enabled, and you can change the
frequency reference.
■
F6-08: Comm Parameter Reset @Initialize
No.
Name
(Hex.)
F6-08 Comm Parameter Reset
@Initialize
(036A)
0 : No Reset - Parameters Retained
1 : Reset Back to Factory Default
Note:
When you use A1-03 to initialize the drive, this setting will not change.
■
F6-14: BUS Error Auto Reset
No.
Name
(Hex.)
F6-14 BUS Error Auto Reset
(03BB)
0 : Disable
1 : Enabled
■
F6-15: Comm. Option Parameters Reload
No.
Name
(Hex.)
F6-15 Comm. Option Parameters
Reload
(0B5B)
Note:
• Set F6-15 = 0, 1 to reload F6-xx, F7-xx.
• Set F6-15 = 0, 1 to reset the display on the keypad to 0.
0 : Reload at Next Power Cycle
Restart the drive to update parameters.
1 : Reload Now
The changed parameters are updated without restarting the drive.
2 : Cancel Reload Request
Cancels CyPo [Cycle Power to Accept Changes].
■
F6-16: Gateway Mode
No.
Name
(Hex.)
F6-16 Gateway Mode
(0B8A)
0 : Disabled
1 : Enabled: 1 Slave Drives
2 : Enabled: 2 Slave Drives
3 : Enabled: 3 Slave Drives
4 : Enabled: 4 Slave Drives
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
V/f OLV/PM EZOLV OLV/PM
Sets the function to initialize F6-xx and F7-xx parameters when the drive is initialized with A1-03
[Initialize Parameters].
V/f OLV/PM EZOLV OLV/PM
Sets the automatic reset function for bUS [Option Communication Errors].
V/f OLV/PM EZOLV OLV/PM
Sets the update method when you change F6-xx, F7-xx [Communication Options].
V/f OLV/PM OLV/PM EZOLV
Sets the gateway mode operation and the number of connected slave drives.
Description
Description
Description
Description
2.7 F: Options
Default
(Range)
0
(0, 1)
Default
(Range)
0
(0, 1)
Default
(Range)
0
(0 - 2)
Default
(Range)
0
(0 to 4)
2
271