YASKAWA HV600 Manual page 435

Status Monitor Display
■
S2-01: Timer 1 Start Time
No.
Name
(Hex.)
S2-01 Timer 1 Start Time
(3206)
Note:
• Default is when o4-22 = 1 [Time Format = 12 Hour Clock]. When o4-22 = 0 [24 Hour Clock], default is 00:00. When o4-22 = 2 [12 Hour
JP Clock], default is 00:00 AM.
• Range is when o4-22 = 1. When o4-22 = 0, range is 00:00 to 24:00. When o4-22 = 2, range is 00:00 AM to 11:59 PM.
■
S2-02: Timer 1 Stop Time
No.
Name
(Hex.)
S2-02 Timer 1 Stop Time
(3207)
Note:
• Default is when o4-22 = 1 [Time Format = 12 Hour Clock]. When o4-22 = 0 [24 Hour Clock], default is 00:00. When o4-22 = 2 [12 Hour
JP Clock], default is 00:00 AM.
• Range is when o4-22 = 1. When o4-22 = 0, range is 00:00 to 24:00. When o4-22 = 2, range is 00:00 AM to 11:59 PM.
■
S2-03: Timer 1 Day Selection
No.
Name
(Hex.)
S2-03 Timer 1 Day Selection
(3208)
0 : Timer Disabled
1 : Daily
2 : Mon - Fri
3 : Sat - Sun
4 : Monday
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Table 2.71 Sequence Timer Home Screen Text
You set the Sequence Timers to operate the drive, but there is no Run command.
You set the Sequence timers to operate the drive and applied the Run command, but the timer did not start.
You set the Sequence timers to operate the drive, applied the Run command, and the timer started to operate the
drive.
The message text shows the active timer number.
V/f OLV/PM EZOLV OLV/PM
Sets the start time for timer 1.
V/f OLV/PM OLV/PM EZOLV
Sets the stop time for timer 1.
V/f OLV/PM EZOLV OLV/PM
Sets the days for which sequence timer 1 is active.
2.12 S: Special Applications
Description
Description
Description
Description
Default
(Range)
12:00
(12:00 AM - 11:59 PM)
Default
(Range)
12:00
(12:00 AM - 11:59 PM)
Default
(Range)
0
(0 - 10)
2
435