YASKAWA HV600 Manual page 374

2.9 L: Protection Functions
H3-xx = B:
L5-04:
Y1-11:
Figure 2.99 Auto Restart for High Feedback Detection when b5-09 = 0 [Normal Output (Direct Acting)]
H3-xx = B:
L5-04:
Y1-11:
■
L5-42: Feedback Loss Fault Retry Select
No.
Name
(Hex.)
L5-42 Feedback Loss Fault Retry
Select
(3672)
0 : No Retry
1 : Retry
■
L5-49: Fault Retry Speed Search Select
No.
Name
(Hex.)
L5-49 Fault Retry Speed Search
Select
(3679)
0 : Disabled
1 : Enabled
■
L5-50: Setpoint Not Met Fault Retry Sel
No.
Name
(Hex.)
L5-50 Setpoint Not Met Fault Retry
Sel
(367A)
374
Figure 2.100 Auto Restart for High Feedback Detection when b5-09 = 1
V/f OLV/PM EZOLV OLV/PM
Sets the drive to try an Auto Restart when it drive detects an FDBKL [WIRE Break] fault.
V/f OLV/PM EZOLV OLV/PM
Sets the drive to do a speed search at the start of a Fault Retry.
V/f OLV/PM EZOLV OLV/PM
Sets the drive to try an Auto Restart when it detects an NMS [SetPoint Not Met] fault.
Y1-12:
Y1-14:
HFB Fault:
Y1-12:
Y1-14:
HFB Fault:
Description
Description
Description
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Default
(Range)
0
(0, 1)
Default
(Range)
1
(0, 1)
Default
(Range)
0
(0, 1)