Set Custom Monitors - YASKAWA HV600 Manual

◆

Set Custom Monitors

You can select and register a maximum of 12 monitoring items to regularly show on the keypad.
This procedure shows how to set the motor speed to [Custom Monitor 1].
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If the keypad does not show [Home] on
2.
Push (Menu).
3.
Push or
4.
Push or
5.
Push or
6.
Push or
Set the x-xx part of monitor Ux-xx. For example, to show monitor U1-05, set it to "105" as shown in this figure.
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
, push
to select [Monitors], then push
to select [Custom Monitor], then push
to select [Custom Monitor 1], then push
to select the monitor number to register, then push
(Back) to show [Home] on
.
(Setup).
.
.
3.6 Keypad Operation
.
3
525