Start Data Logging - YASKAWA HV600 Manual

3.6 Keypad Operation
4.
Push /
5.
Push /
• [No]: The keypad will not show the Initial Setup Screen when the drive is energized.
• [Yes]: The keypad will show the Initial Setup Screen when the drive is energized.
◆

Start Data Logging

The data log function saves drive status information. Monitors Ux-xx are the source of log information. The procedure
in this section shows how to start logging data.
You can record a maximum of 10 monitors.
1.
Insert a microSD card in the keypad.
2.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
3.
Push (Menu).
4.
Push or
552
to select [Show Initial Setup Screen], then push
to select [No], then push
, push
to select [Diagnostic Tools], then push
.
.
(Back), and then push
.
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
to show [Home].