YASKAWA HV600 Manual page 54

1.10 H: Terminal Functions
Setting Value Function
22 External Fault (NO-
@Run-Ramp)
23 External Fault (NC-
@Run-Ramp)
24 External Fault (NO-
Always-Coast)
25 External Fault (NC-
Always-Coast)
26 External Fault (NO-
@Run-Coast)
27 External Fault (NC-
@Run-Coast)
28 External Fault (NO-
Always-FStop)
29 External Fault (NC-
Always-FStop)
2A External Fault (NO-
@Run-FStop)
2B External Fault (NC-
@Run-FStop)
2C External Fault (NO-
Always-Alarm)
2D External Fault (NC-
Always-Alarm)
2E External Fault (NO-
@Run-Alarm)
2F External Fault (NC-
@Run-Alarm)
30 PID Integrator Reset
31 PID Integrator Hold
34 PID Soft Starter Disable
35 PID Input (Error) Invert
54
V/f OLV/PM EZOLV OLV/PM
When the terminal activates during run, the drive ramps to stop in the selected deceleration time. Fault relay output
terminal MA-MC will turn ON, and MB-MC will turn OFF. The drive does not detect external faults while the drive is
stopped.
V/f OLV/PM OLV/PM EZOLV
When the terminal deactivates during run, the drive ramps to stop in the selected deceleration time. Fault relay output
terminal MA-MC will turn ON, and MB-MC will turn OFF. The drive does not detect external faults while the drive is
stopped.
V/f OLV/PM EZOLV OLV/PM
When the terminal activates, the drive shuts off the output and the motor coasts to stop. Fault relay output terminal
MA-MC will turn ON, and MB-MC will turn OFF. The drive always detects external faults whether the drive is
stopped or running.
V/f OLV/PM EZOLV OLV/PM
When the terminal deactivates, the drive shuts off the output and the motor coasts to stop. Fault relay output terminal
MA-MC will turn ON, and MB-MC will turn OFF. The drive always detects external faults whether the drive is
stopped or running.
V/f OLV/PM EZOLV OLV/PM
When the terminal activates during run, the drive shuts off the output and the motor coasts to stop. Fault relay output
terminal MA-MC will turn ON, and MB-MC will turn OFF. The drive does not detect external faults while the drive is
stopped.
V/f OLV/PM EZOLV OLV/PM
When the terminal deactivates during run, the drive shuts off the output and the motor coasts to stop. Fault relay output
terminal MA-MC will turn ON, and MB-MC will turn OFF. The drive does not detect external faults while the drive is
stopped.
V/f OLV/PM EZOLV OLV/PM
When the terminal activates, the drive stops the motor in the deceleration time set to C1-09 [Fast Stop Time]. Fault
relay output terminal MA-MC turns ON, and MB-MC turns OFF. Stopped drives and running drives will detect
external faults.
V/f OLV/PM EZOLV OLV/PM
When the terminal deactivates, the drive stops the motor in the deceleration time set to C1-09 [Fast Stop Time]. Fault
relay output terminal MA-MC turns ON, and MB-MC turns OFF. Stopped drives and running drives will detect
external faults.
V/f OLV/PM EZOLV OLV/PM
When the terminal activates during run, the drive stops the motor in the deceleration time set to C1-09 [Fast Stop
Time]. Fault relay output terminal MA-MC turns ON, and MB-MC turns OFF. Stopped drives will not detect external
faults.
V/f OLV/PM EZOLV OLV/PM
When the terminal deactivates during run, the drive stops the motor in the deceleration time set to C1-09 [Fast Stop
Time]. Fault relay output terminal MA-MC turns ON, and MB-MC turns OFF. Stopped drives will not detect external
faults.
V/f OLV/PM EZOLV OLV/PM
When the terminal activates, the keypad shows EFx [External Fault (Terminal Sx)] and the output terminal set for
Alarm [H2-01 to H2-03 = 10] activates. The drive continues operation. The drive always detects external faults
whether the drive is stopped or running.
V/f OLV/PM EZOLV OLV/PM
When the terminal deactivates, the keypad shows EFx [External Fault (Terminal Sx)] and the output terminal set for
Alarm [H2-01 to H2-03 = 10] activates. The drive continues operation. The drive always detects external faults
whether the drive is stopped or running.
V/f OLV/PM EZOLV OLV/PM
When the terminal activates during run, the keypad shows EFx [External Fault (Terminal Sx)] and the output terminal
set for Alarm [H2-01 to H2-03 = 10] activates. The drive continues operation. The drive does not detect external faults
while the drive is stopped.
V/f OLV/PM OLV/PM EZOLV
When the terminal deactivates during run, the keypad shows EFx [External Fault (Terminal Sx)] and the output
terminal set for Alarm [H2-01 to H2-03 = 10] activates. The drive continues operation. The drive does not detect
external faults while the drive is stopped.
V/f OLV/PM EZOLV OLV/PM
Sets the command to reset and hold the PID control integral to 0 when the terminal is ON.
V/f OLV/PM EZOLV OLV/PM
Sets the command to hold the integral value of the PID control while the terminal is activated.
V/f OLV/PM EZOLV OLV/PM
Sets the PID soft starter function.
ON : Disable
OFF : Enabled
V/f OLV/PM OLV/PM EZOLV
Sets the command to turn the terminal ON and OFF to switch the PID input level (polarity).
Description
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Ref.
291
291
291
291
291
291
291
291
291
291
291
291
291
291
292
292
292
292