YASKAWA HV600 Manual page 473

Delta to Setpoint Entry for Sleep Wake-up Level
Delta to Setpoint Entry lets you set Y1-04 [Sleep Wake-up Level] relative to the current setpoint and set a PID setpoint
when PID is not active.
Parameter/Condition
Y1-04
b5-09 = 0 [PID Output Level Selection = Normal Output (Direct Acting)]
Y1-04
b5-09 = 1 [Reverse Output (Reverse Acting)]
Entry Mode
Absolute
Delta to Setpoint
■
Y2-01: Sleep Level Type
No.
Name
(Hex.)
Y2-01 Sleep Level Type
(3C64)
0 : Output Frequency
1 : Output Current
2 : Feedback
3 : Output Speed (RPM)
5 : Output Frequency (non-PID)
Note:
• Feedback depends on PID direction operation.
• When the Sleep Function is active, the keypad will show the "Sleep" Alarm.
■
Y2-02: Sleep Level
No.
Name
(Hex.)
Y2-02 Sleep Level
(3C65)
RUN
When the monitor data of the level type set in Y2-01 is less than this level for longer than the time set in Y2-03, the
drive will enter Sleep Mode.
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Table 2.80 Absolute Mode and Delta to Setpoint Mode
Keypad Display
V/f OLV/PM EZOLV OLV/PM
Sets the data source that the drive uses to know when to activate the Sleep Function.
V/f OLV/PM EZOLV OLV/PM
Sets the level that the level type set in Y2-01 [Sleep Level Type] must be at for the time set in Y2-03
[Sleep Delay Time] for the drive to enter Sleep Mode.
Delta Entry
-0.00 to -99.99
+0.00 to +99.99
Description
The value set for Y1-04 represents the feedback level that will wake-up the drive. You can
set Y1-04 as an absolute value.
When the left-most digit changes to a Δ (delta), you can set a Sleep Wake-up Level relative
to the setpoint.
The effective Wake-up Level changes when b5-09 changes:
• b5-09 = 0: "Setpoint - Y1-04"
• b5-09 = 1: "Setpoint + Y1-04"
Description
Description
2.14 Y: Application Features
Absolute Entry
0.00 to 99.99
0.00 to 99.99
Default
(Range)
5
(0 - 5)
Default
(Range)
0.0
(0.0 - 6000.0)
2
473