Set Backlight To Automatically Turn Off - YASKAWA GA700 Technical Manual

3.6 Keypad Operation
2.
Push (Menu).
3.
Push or
4.
Push or
5.
Push or
6.
Push or
7.
When you are done changing the value, push
The procedure to set the sampling time is complete.
◆

Set Backlight to Automatically Turn OFF

You can set the backlight of the keypad screen to automatically turn OFF after a set length of time since the last
key operation on the keypad. The procedure in this section shows how to turn ON and turn OFF the backlight.
186
to select [Diagnostic Tools], then push
to select [Data Logger], then push
to select [Log Sampling Interval], then push
to select the digit, then push
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
.
(Setup).
.
or to change the value.
.