YASKAWA HV600 Manual page 151

*1 This is the value for 208 V class drives. Double the value for 480 V class drives.
*2 These values are the default settings for E1-04 to E1-10 and E3-04 to E3-10 [V/f Pattern for Motor 2]. These settings are the same as
those for the V/f pattern when E1-03 = 1 [Const Trq, 60Hz base, 60Hz max].
*3 The default setting varies depending on the setting of E5-01 [PM Motor Code Selection].
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
1.21 Parameters Changed by E1-03 [V/f Pattern Selection]
1
151