YASKAWA HV600 Manual page 49

No.
Name
(Hex.)
F7-25 Dynamic Out Param 3 for
CommCard
(03FD)
F7-26 Dynamic Out Param 4 for
CommCard
(03FE)
F7-27 Dynamic Out Param 5 for
CommCard
(03FF)
F7-28 Dynamic Out Param 6 for
CommCard
(0370)
F7-29 Dynamic Out Param 7 for
CommCard
(0371)
F7-30 Dynamic Out Param 8 for
CommCard
(0372)
F7-31 Dynamic Out Param 9 for
CommCard
(0373)
F7-32 Dynamic Out Param 10
for CommCard
(0374)
F7-33 Dynamic In Param 1 for
CommCard
(0375)
F7-34 Dynamic In Param 2 for
CommCard
(0376)
F7-35 Dynamic In Param 3 for
CommCard
(0377)
F7-36 Dynamic In Param 4 for
CommCard
(0378)
F7-37 Dynamic In Param 5 for
CommCard
(0379)
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Description
V/f OLV/PM OLV/PM EZOLV
When you use an Ethernet/IP option, sets Output Assembly 116. The drive writes the
values from Output Assembly 116 to the MEMOBUS/Modbus address register that is
stored for each parameter. The drive will not write the values from Output Assembly 116
to the registers when the MEMOBUS/Modbus address is 0. When you use a PROFINET
option, set this parameter to set to configurable output 3.
V/f OLV/PM EZOLV OLV/PM
Sets Output Assembly 116 when you use an Ethernet/IP option. The drive writes the values
from Output Assembly 116 to the MEMOBUS/Modbus address register that is stored for
each parameter. The drive will not write the values from Output Assembly 116 to the
registers when the MEMOBUS/Modbus address is 0. When you use a ProfiNet option, set
this parameter to set to configurable output 4.
V/f OLV/PM EZOLV OLV/PM
When you use an Ethernet/IP option, sets Output Assembly 116. The drive writes the
values from Output Assembly 116 to the MEMOBUS/Modbus address register that is
stored for each parameter. The drive will not write the values from Output Assembly 116
to the registers when the MEMOBUS/Modbus address is 0. When you use a PROFINET
option, set this parameter to set to configurable output 5.
V/f OLV/PM OLV/PM EZOLV
When you use an Ethernet/IP option, sets Output Assembly 116. The drive writes the
values from Output Assembly 116 to the MEMOBUS/Modbus address register that is
stored for each parameter. The drive will not write the values from Output Assembly 116
to the registers when the MEMOBUS/Modbus address is 0.
V/f OLV/PM EZOLV OLV/PM
When you use an Ethernet/IP option, sets Output Assembly 116. The drive writes the
values from Output Assembly 116 to the MEMOBUS/Modbus address register that is
stored for each parameter. The drive will not write the values from Output Assembly 116
to the registers when the MEMOBUS/Modbus address is 0.
V/f OLV/PM EZOLV OLV/PM
When you use an Ethernet/IP option, sets Output Assembly 116. The drive writes the
values from Output Assembly 116 to the MEMOBUS/Modbus address register that is
stored for each parameter. The drive will not write the values from Output Assembly 116
to the registers when the MEMOBUS/Modbus address is 0.
V/f OLV/PM EZOLV OLV/PM
When you use an Ethernet/IP option, sets Output Assembly 116. The drive writes the
values from Output Assembly 116 to the MEMOBUS/Modbus address register that is
stored for each parameter. The drive will not write the values from Output Assembly 116
to the registers when the MEMOBUS/Modbus address is 0.
V/f OLV/PM EZOLV OLV/PM
When you use an Ethernet/IP option, sets Output Assembly 116. The drive writes the
values from Output Assembly 116 to the MEMOBUS/Modbus address register that is
stored for each parameter. The drive will not write the values from Output Assembly 116
to the registers when the MEMOBUS/Modbus address is 0.
V/f OLV/PM OLV/PM EZOLV
Sets Input Assembly 166 when you use an Ethernet/IP option. The drive sends the values
from the MEMOBUS/Modbus address registers stored for each parameter to Input
Assembly 166. The drive returns the default register value for the option card when the
MEMOBUS/Modbus address is 0 and the value sent to Input Assembly 166 is not defined.
When you use a ProfiNet option, set this parameter to set to configurable input 1.
V/f OLV/PM OLV/PM EZOLV
Sets Input Assembly 166 when you use an Ethernet/IP option. The drive sends the values
from the MEMOBUS/Modbus address registers stored for each parameter to Input
Assembly 166. The drive returns the default register value for the option card when the
MEMOBUS/Modbus address is 0 and the value sent to Input Assembly 166 is not defined.
When you use a ProfiNet option, set this parameter to set to configurable input 2.
V/f OLV/PM EZOLV OLV/PM
Sets Input Assembly 166 when you use an Ethernet/IP option. The drive sends the values
from the MEMOBUS/Modbus address registers stored for each parameter to Input
Assembly 166. The drive returns the default register value for the option card when the
MEMOBUS/Modbus address is 0 and the value sent to Input Assembly 166 is not defined.
When you use a ProfiNet option, set this parameter to set to configurable input 3.
V/f OLV/PM EZOLV OLV/PM
Sets Input Assembly 166 when you use an Ethernet/IP option. The drive sends the values
from the MEMOBUS/Modbus address registers stored for each parameter to Input
Assembly 166. The drive returns the default register value for the option card when the
MEMOBUS/Modbus address is 0 and the value sent to Input Assembly 166 is not defined.
When you use a ProfiNet option, set this parameter to set to configurable input 4.
V/f OLV/PM EZOLV OLV/PM
Sets Input Assembly 166 when you use an Ethernet/IP option. The drive sends the values
from the MEMOBUS/Modbus address registers stored for each parameter to Input
Assembly 166. The drive returns the default register value for the option card when the
MEMOBUS/Modbus address is 0 and the value sent to Input Assembly 166 is not defined.
When you use a ProfiNet option, set this parameter to set to configurable input 5.
1.9 F: Options
Default
Ref.
(Range)
0 276
0 276
0 276
0 276
0 276
0 276
0 276
0 276
0 276
0 276
0 276
0 276
0 276
49
1