■
Home Screen Text
When Y1-01 = 3 [Multiplex Mode = Memobus Network] and o1-40 = 0 [Home Screen Display Selection = Custom
Monitor], the top line text of the HOME Screen Status Display is different as specified by the AUTO Mode Run
command or the Network Run command.
Keypad Display
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Network State
• The drive is not operating in Auto Mode.
• Drive cannot accept commands from the HV600 MEMOBUS network.
• The drive is in Auto Mode.
• The drive is waiting for a Run command from the HV600 MEMOBUS network.
• The drive is in Auto Mode.
• The drive is in Lead operation and is regulating the system.
• This drive sets staging and de-staging conditions.
• The drive is in Auto Mode.
• The drive is in Lag operation and is holding the speed at the time it made the switch
from a Lead Drive to a Lag.
• The drive will hold the speed until the Y9-07 [Lag Fixed Speed Delay] time is expired.
• The drive is in Auto Mode.
• The drive is in Lag operation and is operating at the speed set in Y9-06 [Lag Fixed
Speed].
• The drive is in Auto Mode.
• The drive is in Lag operation and is following the speed of the current Lead Drive.
The drive is in Alternation Stabilization Mode.
2.14 Y: Application Features
2
483