Make The Initial Settings - YASKAWA HV600 Manual

3.5 Items to Check before Starting Up the Drive
Note:
Make sure that you use a keypad with FLASH number 1004 or later. Keypads with FLASH numbers 1003 and earlier will not show
characters correctly.
◆

Make the Initial Settings

The keypad will show the Initial Setup screen when you energize the drive for the first time. You can set the date and
time or the language to show on the keypad.
Note:
If the keypad does not show the Initial Setup screen, select [Initial Setup] from the Main Menu to show the Initial Setup screen.
1.
Make the initial settings for each item.
A - Language Selection
B - Set Date/Time
Note:
If you select [Yes] from the [Show Initial Setup Screen] setting, the keypad will show the Initial Setup screen each time the drive is
energized.
If you select [NO], the keypad will not show the Initial Setup screen each time the drive is energized, starting with the next time.
2.
Push (Home).
The display shows the HOME screen.
522
C - Show Initial Setup Screen
YASKAWA TOEPYAIHV6002A HV600 Drive Programming