YASKAWA HV600 Manual page 103

No.
Name
(Hex.)
S2-16 Timer 4 Start Time
(3215)
S2-17 Timer 4 Stop Time
(3216)
S2-18 Timer 4 Day Selection
(3217)
S2-19 Timer 4 Sequence
Selection
(3218)
S2-20 Timer 4 Reference Source
(3219)
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Description
V/f OLV/PM OLV/PM EZOLV
Sets the start time for timer 4.
Note:
• Default is when o4-22 = 1 [Time Format = 12 Hour Clock]. When o4-22 = 0 [24
Hour Clock], default is 00:00. When o4-22 = 2 [12 Hour JP Clock], default is 00:00
AM.
• Range is when o4-22 = 1. When o4-22 = 0, range is 00:00 to 24:00. When o4-22 =
2, range is 00:00 AM to 11:59 PM.
V/f OLV/PM OLV/PM EZOLV
Sets the stop time for timer 4.
Note:
• Default is when o4-22 = 1 [Time Format = 12 Hour Clock]. When o4-22 = 0 [24
Hour Clock], default is 00:00. When o4-22 = 2 [12 Hour JP Clock], default is 00:00
AM.
• Range is when o4-22 = 1. When o4-22 = 0, range is 00:00 to 24:00. When o4-22 =
2, range is 00:00 AM to 11:59 PM.
V/f OLV/PM EZOLV OLV/PM
Sets the days for which sequence timer 4 is active.
0 : Timer disabled
1 : Daily
2 : Mon - Fri
3 : Sat - Sun
4 : Monday
5 : Tuesday
6 : Wednesday
7 : Thursday
8 : Friday
9 : Saturday
10 : Sunday
V/f OLV/PM OLV/PM EZOLV
Sets the drive response when sequence timer 4 is active.
0 : Digital Out Only
1 : Run
2 : Run - PID Disable
3 : Allow Alternation
V/f OLV/PM OLV/PM EZOLV
Selects the frequency reference source to run the drive when sequence timer 4 is active
(only applicable when S2-19 > 0 [Timer 4 Sequence Selection ≠ Digital Out Only]).
0 : Operator (d1-01/YA-01)
1 : Operator (d1-02/YA-02)
2 : Operator (d1-03/YA-03)
3 : Operator (d1-04/YA-04)
4 : Terminals
5 : Serial Com
6 : Option PCB
8 : Set by b1-01
Note:
For reference source 0 to 3, the drive will use d1-xx frequency reference when PID
mode is disabled and YA-xx setpoint when PID is enabled.
1.16 S: Special Applications
Default
Ref.
(Range)
12:00 439
(12:00 AM - 11:59 PM)
12:00 439
(12:00 AM - 11:59 PM)
0 439
(0 - 10)
0 440
(0 - 3)
0 440
(0 - 8)
1
103