YASKAWA HV600 Manual page 533

13.
Push to keep the changes.
14.
Push (Back).
If necessary, use the same procedure to set [Custom Monitor 2].
■
Set the Time Scale for the Trend Plot Monitor
The procedure in this section shows how to set the time scale for the trend plot monitor.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push (Menu).
3.
Push or
4.
Push or
5.
Push or
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
, push (Back) to show [Home] on
to select [Monitors], then push
to select [Trend Plot], then push
to select [Trend Plot Time Scale Setting], then push
.
.
(Setup).
.
3.6 Keypad Operation
533
3