3.6 Keypad Operation
4.
Push
or
5.
Push
or
6.
Push
or
The keypad will show the "End" message when the write process is complete.
◆
Checking Modified Parameters
■
Modified Parameters Screen Displays
The keypad display for Modified Parameters screen changes when the A1-06 [Application Preset] and A1-07
[DriveWorksEZ Function Selection] settings change:
A1-06 Settings
A1-07 Settings
0
0
1 - 8
0
0 - 8
1
542
to select the item to verify, then push
to select [Delete (keypad)], then push
to select the data to delete, then push
Keypad Display
.
.
.
When you set A1-06 = 0 [No Preset Selected] and A1-07 = 0 [DWEZ Disabled], the
Modified Parameters screen will only show [Standard].
When you set an application macro (A1-06 ≠ 0), the Modified Parameters screen will show
the Standard menu and Application Presets menu.
• Standard: This menu shows all parameters modified by the A1-06 setting and any
standard drive parameters modified after you changed the A1-06 setting.
• Application Presets: This menu only shows parameters not set by A1-06.
When A1-07 = 1 [DWEZ Enabled], the keypad will also show the DWEZ menu selection.
If the modified parameters are returned back to Application Preset default, causing the
numbers of parameters modified for Application Preset to be 0, the user will be returned
back to the User Modified Parameters menu screen with the Standard list selected.
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Description