YASKAWA HV600 Manual page 238

2.5 d: References
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change. Calculate the upper limit value with this formula:
Upper limit value = (E1-04) × (d2-01) / 100
• To set d1-01 to 1-step speed parameter in a multi-step speed operation, set b1-01 = 0 [Frequency Reference Selection 1 = Keypad].
■
d1-02: Reference 2
No.
Name
(Hex.)
d1-02 Reference 2
(0281)
RUN
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• To set d1-02 to Multi-Step Speed 2, set H3-02 and H3-10 ≠ 2 [MFAI Function Select ≠ Auxiliary Frequency Reference 1].
■
d1-03: Reference 3
No.
Name
(Hex.)
d1-03 Reference 3
(0282)
RUN
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• To set d1-03 to Multi-Step Speed 3, set H3-02 and H3-10 ≠ 3 [MFAI Function Select ≠ Auxiliary Frequency Reference 2].
■
d1-04: Reference 4
No.
Name
(Hex.)
d1-04 Reference 4
(0283)
RUN
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• This parameter sets the frequency reference of Multi-Step Speed 4.
■
d1-05: Reference 5
No.
Name
(Hex.)
d1-05 Reference 5
(0284)
RUN
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• This parameter sets the frequency reference of Multi-Step Speed 5.
■
d1-06: Reference 6
No.
Name
(Hex.)
d1-06 Reference 6
(0285)
RUN
238
V/f OLV/PM EZOLV OLV/PM
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
V/f OLV/PM EZOLV OLV/PM
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
V/f OLV/PM EZOLV OLV/PM
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
V/f OLV/PM EZOLV OLV/PM
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
V/f OLV/PM EZOLV OLV/PM
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Description
Description
Description
Description
Description
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Default
(Range)
0.00 Hz
(0.00 - 400.00 Hz)
Default
(Range)
0.00 Hz
(0.00 - 400.00 Hz)
Default
(Range)
0.00 Hz
(0.00 - 400.00 Hz)
Default
(Range)
0.00 Hz
(0.00 - 400.00 Hz)
Default
(Range)
0.00 Hz
(0.00 - 400.00 Hz)