Led Status Ring - YASKAWA HV600 Manual

3.3

LED Status Ring

The LED Status Ring on the drive cover shows the drive operating status.
A - ALM/ERR
B - Ready
LED
Illuminated
A ALM/ERR Flashing
Illuminated
Flashing
B Ready Flashing Quickly
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Status
The drive detects a fault.
The drive detects:
• An alarm
• An oPE parameter setting error
*1
• An Auto-Tuning error
Note:
If the drive detects a fault and an alarm at the same time, the LED will illuminate to identify a fault.
OFF
There are no drive faults or alarms.
The drive is operating or is prepared for operation.
*1 The drive is in STo [Safe Torque OFF] condition.
The voltage of the main circuit power supply dropped, and only the external 24 V power supply is providing the power to the
*1
drive.
• The drive detects a fault.
OFF
• There is no fault and the drive received a Run command, but the drive cannot operate. For example, in Programming
Mode.
C - RUN
Description

3.3 LED Status Ring

515
3