Start-Up Procedures; Flowchart A: Connect And Run The Motor With Minimum Setting Changes - YASKAWA HV600 Manual

3.4

Start-up Procedures

This section gives the basic steps necessary to start up the drive.
Use the flowcharts in this section to find the most applicable start-up method for your application.
This section gives information about only the most basic settings.
Note:
Refer to the A1-06 section to use an Application Preset to set up the drive.
◆

Flowchart A: Connect and Run the Motor with Minimum Setting Changes

Flowchart A shows a basic start-up sequence to connect and run a motor with a minimum of setting changes. Settings
can change when the application changes.
Use the drive default parameter settings for basic applications where high precision is not necessary.
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Figure 3.8 Basic Steps before Startup

3.4 Start-up Procedures

517
3