YASKAWA HV600 Manual page 532

3.6 Keypad Operation
8.
Push or
9.
Push or
• Push (Default) to set the parameters to the factory default.
• Push (Min/Max) to move between the minimum value and maximum value.
10.
Push to keep the changes.
11.
Push or
12.
Push or
• Push (Default) to set the parameters to the factory default.
• Push (Min/Max) to move between the minimum value and maximum value.
532
to select [Trend Plot 1 Scale Minimum Value], then push
to select the specified digit, then push
to select [Trend Plot 1 Scale Maximum Value], then push
to select the specified digit, then push
.
or to select the correct number.
.
or to select the correct number.
YASKAWA TOEPYAIHV6002A HV600 Drive Programming