YASKAWA HV600 Manual page 148

1.20 Parameters that Change from the Default Settings with A1-02 [Control Method Selection]
*2 The default setting is different for different models.
• 2011 - 2114, 4005 - 4052: 0.6
• 2143 - 2273, 4065 - 4302: 0.3
*3 The default settings are different for different motor types.
• E9-01 = 0 [Motor Type Selection = Induction (IM)]: 2
• E9-01 = 1, 2 [Permanent Magnet (PM), Synchronous Reluctance (SynRM)]: 1
*4 The unit of measure changes when o2-04 changes.
*5 This is the value for 208 V class drives. Double the value for 480 V class drives.
*6 The default settings are different for different motor types.
• E9-01 = 0 [Motor Type Selection = Induction (IM)]: 1
• E9-01 = 1, 2 [Permanent Magnet (PM), Synchronous Reluctance (SynRM)]: 4
*7 The default settings are different for different motor types.
• E9-01 = 0 [Motor Type Selection = Induction (IM)]: 0
• E9-01 = 1, 2 [Permanent Magnet (PM), Synchronous Reluctance (SynRM)]: 1
148 YASKAWA TOEPYAIHV6002A HV600 Drive Programming