YASKAWA HV600 Manual page 426

2.11 o: Keypad-Related Settings
Unit Code (Hex.) Unit
02 RPM
03 %
04 VAC
05 VDC
06 A
07 sec
Third and Subsequent Rows: Log Data
This example shows the data text strings and data generated for the third row of log data.
Example of generated data:
02,0012,160107111239,1770,1770,00BE,0118,0028,0000,0000,0000,0000,0000,0000,0000,00000C
No. Item
1 Attribute
2 File number
3 Time stamp
4 Log Monitor Data 1
5 Log Monitor Data 2
: :
13 Log Monitor Data 10
14 Reserved
15 Encoding data
16 File number
■
o5-01: Log Start/Stop Selection
No.
Name
(Hex.)
o5-01 Log Start/Stop Selection
(1551)
RUN
0 : OFF
Stops the data log.
1 : ON
Starts the data log as specified by the sampling cycle set in o5-02 [Log Sampling Interval].
■
o5-02: Log Sampling Interval
No.
Name
(Hex.)
o5-02 Log Sampling Interval
(1552)
RUN
426
Unit Code (Hex.) Unit
0A Ω
0B ms
0C kHz
0D PSI
0E MPM
0F FPM
Number of
Characters
2 [02] shows that the record is a monitor data record.
4 The [xxx] part of the [GLOG0xxx.csv] filename is a 3-digit decimal number in hexadecimal format.
12 Data log data was retrieved (YYMMDDHHMMSS)
4 Monitor number selected by o5-03 [Log Monitor Data 1]
4 Monitor number selected by o5-04 [Log Monitor Data 2]
: :
4 Monitor number selected by o5-12 [Log Monitor Data 10]
4 -
4 Encoding data for log monitor data 1 to 10 (Hex.)
Bits 0 to 9 show the encoding of log monitor data 1 to 10. A bit value of 1 shows that the data represents a negative value.
(Log monitor data 1 to 10 are absolute value data without encoding)
Example when log monitor data 2, 5, and 8 show negative values: Bits 1, 4, and 7 have values of 1, and the encoding data
= 0010010010 (Bin.) = 0092 (Hex.)
6 Row number (Hex.) in the data log file
V/f OLV/PM OLV/PM EZOLV
Sets the data log function. This parameter is only available on an HOA keypad.
V/f OLV/PM OLV/PM EZOLV
Sets the data log sampling cycle. This parameter is only available on an HOA keypad.
Unit Code (Hex.) Unit
12 us
13 min
14 °C
15 W
16 kWH
17 MWH
Description
Description
Description
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Unit Code (Hex.) Unit
1A –
1B –
1C –
1D –
1E –
1F –
Default
(Range)
0
(0 - 1)
Default
(Range)
100 ms
(100 - 60000 ms)