Show Information About The Drive - YASKAWA HV600 Manual

8.
Push or
9.
When you are done changing the value, push
The procedure to set the backlight to turn OFF automatically is complete.
◆

Show Information about the Drive

The procedure in this section shows how to show the drive model, maximum applicable motor output, rated output
current, software version, and the serial number on the keypad.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push (Menu).
3.
Push or
4.
Push or
The keypad will show the drive information.
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
to select the digit, then push
, push (Back) to show [Home] on
to select [Diagnostic Tools], then push
to select [Drive Information], then push
or to change the value.
.
.
.
.
3.6 Keypad Operation
557
3