YASKAWA HV600 Manual page 463

1 : SPM motor
SPM motors have magnets attached to the surface of the rotor with adhesive material, and Ld = Lq.
■
T2-04: PM Motor Rated Power
No.
Name
(Hex.)
T2-04 PM Motor Rated Power
(0730)
■
T2-05: PM Motor Rated Voltage
No.
Name
(Hex.)
T2-05 PM Motor Rated Voltage
(0732)
■
T2-06: PM Motor Rated Current
No.
Name
(Hex.)
T2-06 PM Motor Rated Current
(0733)
■
T2-07: PM Motor Base Frequency
No.
Name
(Hex.)
T2-07 PM Motor Base Frequency
(0753)
■
T2-08: Number of PM Motor Poles
No.
Name
(Hex.)
T2-08 Number of PM Motor Poles
(0734)
■
T2-10: PM Motor Stator Resistance
No.
Name
(Hex.)
T2-10 PM Motor Stator Resistance
(0754)
Note:
This parameter does not set line-to-line resistance.
■
T2-11: PM Motor d-Axis Inductance
No.
Name
(Hex.)
T2-11 PM Motor d-Axis
Inductance
(0735)
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
V/f OLV/PM EZOLV OLV/PM
Uses the units set in o1-58 [Motor Power Unit Selection] to set the PM motor rated output power.
V/f OLV/PM EZOLV OLV/PM
Sets the rated voltage (V) of the motor.
V/f OLV/PM OLV/PM EZOLV
Sets the rated current (A) of the motor.
V/f OLV/PM OLV/PM EZOLV
Sets the base frequency (Hz) of the motor.
V/f OLV/PM OLV/PM EZOLV
Sets the number of motor poles.
V/f OLV/PM EZOLV OLV/PM
Sets the stator resistance for each motor phase.
V/f OLV/PM EZOLV OLV/PM
Sets the d-axis inductance of the motor on a per phase basis.
Description
Description
Description
Description
Description
Description
Description
2.13 T: Auto-Tuning
Default
(Range)
Determined by o2-04
(0.00 - 650.00 HP)
Default
(Range)
208 V Class: 230.0 V,
480 V Class: 460.0 V
(208 V Class: 0.0 - 255.0 V,
480 V Class: 0.0 - 510.0 V)
Default
(Range)
Determined by o2-04
(10% to 200% of the drive
rated current)
Default
(Range)
60.0 Hz
(0.0 - 400.0 Hz)
Default
(Range)
4
(2 - 48)
Default
(Range)
Determined by T2-02
(0.000 - 65.000 Ω)
Default
(Range)
Determined by T2-02
(0.00 - 600.00 mH)
2
463