YASKAWA HV600 Manual page 505

■
YF-33: PI Aux Custom Unit Character 2
No.
Name
(Hex.)
YF-33 PI Aux Custom Unit
Character 2
(3F70)
Refer to Custom Units on page 207
■
YF-34: PI Aux Custom Unit Character 3
No.
Name
(Hex.)
YF-34 PI Aux Custom Unit
Character 3
(3F71)
Refer to Custom Units on page 207
■
YF-35: PI Aux Minimum Transducer Scale
No.
Name
(Hex.)
YF-35 PI Aux Minimum
Transducer Scale
(3F72)
Note:
• To enable this parameter, set it to less than YF-02 [PI Aux Control Transducer Scale]. If you set it to more than YF-02, it will disable the PI
Auxiliary Feedback (set to 0).
• Parameters YF-21 [PI Aux Ctrl Level Unit Selection] and YF-22 [PI Aux Level Decimal Place Pos] set the unit and resolution.
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
V/f OLV/PM OLV/PM EZOLV
Sets the second character of the PI Aux custom unit display when YF-21 = 49 [PI Aux Ctrl Level
Unit Selection = Custom (YF-32～34)].
for more information about available selections.
V/f OLV/PM OLV/PM EZOLV
Sets the third character of the PI Aux custom unit display when YF-21 = 49 [PI Aux Ctrl Level Unit
Selection = Custom (YF-32～34)].
for more information about available selections.
V/f OLV/PM EZOLV OLV/PM
Sets the minimum scale output of the pressure transducer that is connected to the terminal set for H3-
xx = 27 [MFAI Function Selection = PI Auxiliary Control Feedback].
2.14 Y: Application Features
Description
Description
Description
Default
(Range)
41
(20 - 7A)
Default
(Range)
41
(20 - 7A)
Default
(Range)
0.0 PSI
(-999.9 - +999.9 PSI)
2
505