YASKAWA HV600 Manual page 411

F3 key takes you directly to the Monitor screen with U1-01 [Frequency Reference] selected.
4 : RLY (ON/OFF H2-XX = A9)
F3 key toggles the state of the digital output set for H2-xx = A9 [MFDO Function Selection = RELAY Operator
Control].
■
o1-18: User Defined Parameter 1
No.
Name
(Hex.)
o1-18 User Defined Parameter 1
(310A)
■
o1-19: User Defined Parameter 2
No.
Name
(Hex.)
o1-19 User Defined Parameter 2
(310B)
■
o1-24 to o1-35: Custom Monitor 1 to 12
No.
Name
(Hex.)
o1-24 to o1-35 Custom Monitor 1 to 12
(11AD - 11B8)
RUN
These parameters save the monitor items selected by the HOA keypad [Custom Monitor].
Note:
• The default setting for o1-26 changes when b5-01 [PID Mode Setting] changes:
–b5-01 = 0 [Disabled]: 103
–b5-01 ≠ 0: 501
• You can show a maximum of three selected monitors on one HOA keypad screen.
–When you select only one monitor, the text size of this monitor increases. For example, when o1-25 to o1-35 = 0, the text size of the
monitor saved in o1-24 increases.
–When you select two monitors, the text size of these monitors increase.
–When you select four or more monitors, the fourth monitor and all additional monitors are shown on the next screens.
• Monitors selected with o1-24 to o1-26 can be displayed as a bar graph, analog gauge, or trend plot.
–Bar graph display: 3 monitors maximum
Select with o1-24, o1-25, and o1-26.
–Analog gauge display: 1 monitor
Select with o1-24.
–Trend plot display: 2 monitors
Select with o1-24 and o1-25.
• You can only set parameters o1-24 to o1-26 with analog output monitors.
• You can set all monitors to parameters o1-27 to o1-35.
■
o1-36: LCD Backlight Brightness
No.
Name
(Hex.)
o1-36 LCD Backlight Brightness
(11B9)
RUN
When you decrease the setting value, the intensity of the backlight decreases.
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
V/f OLV/PM EZOLV OLV/PM
Lets you set values to use as reference information.
V/f OLV/PM EZOLV OLV/PM
Lets you set values to use as reference information.
V/f OLV/PM EZOLV OLV/PM
Set a maximum of 12 monitors as user monitors. These parameters are only available on an HOA
keypad.
V/f OLV/PM OLV/PM EZOLV
Sets the intensity of the HOA keypad backlight.
2.11 o: Keypad-Related Settings
Description
Description
Description
Description
Default
(Range)
0
(0 - 999)
Default
(Range)
0
(0 - 999)
Default
(Range)
o1-24: 101
o1-25: 102
o1-26: Determined by b5-01
o1-27 to o1-35: 0
(0, 101 - 1299)
Default
(Range)
5
(1 - 5)
2
411