■
Check Modified Parameters
This procedure will show all parameters that are not at their default values. This helps find settings have been
changed, and is very useful when you replace a drive. This lets you quickly access and re-edit changed parameters.
The keypad will show "0 Parameters" when all parameters are at their default values.
1.
Push
(Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push
(Menu).
3.
Push
or
4.
Push
or
5.
Push
.
6.
Push
or
YASKAWA TOEPYAIHV6002A HV600 Drive Programming
, push
(Back) to show [Home] on
to select [Modified Param / Fault Log], then prush
to select [Modified Parameters], then push
to show the parameter to check.
3.6 Keypad Operation
.
.
.
3
543