Make The Initial Settings - YASKAWA GA800 Maintenance & Troubleshooting

6.5 Items to Check before Starting Up the Drive
◆

Make the Initial Settings

The keypad will show the Initial Setup screen when you energize the drive for the first time. You can set the date and
time and the keypad language. The Setup Wizard prepares the drive for operation, including setting the basic
parameters and doing Auto-Tuning. Refer to
information.
Note:
If the keypad does not show the Initial Setup screen, select [Initial Setup] from the Main Menu to show the Initial Setup screen.
1.
Make the initial settings for each item.
A - Language Selection
B - Set Date/Time
Note:
If you select [Yes] from the [Show Initial Setup Screen] setting, the keypad will show the Initial Setup screen each time the drive is
energized.
If you select [NO], the keypad will not show the Initial Setup screen each time the drive is energized, starting with the next time.
2.
Push [Home].
The display shows the HOME screen.
448
Set Parameters Using the Setup Wizard on page 477
C - Setup Wizard
D - Show Initial Setup Screen
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
for more