GP 21 Installation Space Requirements
Purpose
To outline the general space requirements to enable safe use and adequate access for service.
WARNING
Do not work in a confined space. 1 m (39 inches) space is needed for safe working.
WARNING
USA and Canada. Do not install this machine in a hallway or exit route that does not
have 1.12 m (44 inches) of space additional to the normal space requirements in front of
the machine. To conform with fire regulations this additional 1.12 m (44 inches) of space
is needed in front of the machine in hallway and exit routes.
Machine Height
WC5632 - WC5655
•
Machine height with the platen lowered = 1010mm (40 inches)
•
Machine height with the platen raised = 1400mm (55 inches)
•
Machine height with the DADH lowered = 1140 mm (44.7 inches)
•
Machine height with the DADH raised = 1450 mm (57 inches)
WC5665-WC5687
•
Machine height with the DADH lowered = 1147 mm (45.2 inches)
•
Machine height with the DADH raised = 1457 mm (57.3 inches)
Machine Weight
WC5632-WC5655
•
Basic machine weight = 98.75 kg (217.3 lbs.)
•
Basic machine with DADH weight = 118 kg (259.6 lbs.)
•
Fully configured machine weight = 125 kg (276 lbs.) excluding media shelf.
NOTE: Machine weight does not include the weight of the finisher or tray 5.
WorkCentre 5687 Family
WC5665-WC5687
•
Basic machine weight = 123.15 kg (271 lbs.)
•
Fully configured machine weight = 129.4 kg (284.7 lbs.) excluding media shelf.
NOTE: Machine weight does not include the weight of the finisher or tray 5.
Optional Tray
•
Tray 5 = 30 kg (66 lbs.)
Finishers
•
OCT = 2 kg (4.5 lbs.)
•
1K LCSS = 25 kg (55 lbs.)
•
2K LCSS = 30 kg (66.5 lbs.)
•
HCSS = 58 kg (127.6 lbs.)
•
HCSS BM = 77.5 kg (170.5 lbs.)
•
HVF = 72.8 kg (160 lbs.)
•
HVF BM = 100.3 kg (220.6 lbs.)
•
HVF BM with PPI = 107.5 kg (236.5 lbs.)
•
HVF BM with PPI and Tri-folder = 127.8 kg (281.1 lbs.)
Machine dimensions and Installation Space Requirements
Refer to the relevant subsection:
•
WC5632-WC5687 Standalone Digital Copier (no shelf)
•
WC5632-WC5687 Copier / Printer or Copier / Printer with Scanner (with shelf)
WC5632-WC5687 Standalone Digital Copier (no shelf)
Table 1 shows the dimensions of the WC5632-WC5687 standalone digital copier (no media
shelf) machines and the installation space required for safe operation.
NOTE: The dimensions shown in Table 1 allow for a 1 metre (39.4 inches) minimum safety
workspace around the machine. To acquire the minimum safety workspace it may be neces-
sary to move the machine within the area specified.
A gap of 100 mm is required at the rear of the IOT for airflow to the fans. This is also be suffi-
cient for the DADH when raised.
Figure 1 represents a plan view of a machine installation and is to be read in conjunction with
Table 1. The dimensions A and B outline a footprint of the machine within the boundary of safe
operation, dimensions C and D. The dimension E indicates the area required for airflow / work-
space at the rear of the machine.
August 2007
6-49
General Procedures & Information
GP 21