Xerox WorkCentre 5687 Series Service Manual page 1943

Front
Figure 1 Installation plan
WC5632-WC5687 Copier / Printer or Copier / Printer with Scanner (with shelf)
Table 2 shows the dimensions of the WC5632-WC5687 copier / printer or copier / printer with
scanning (with media shelf) machines and the installation space required for safe operation.
NOTE: The installation dimensions in Table 2 allow for a 1 metre (39.4 inches) minimum safety
workspace around the machine. To acquire this minimum safety workspace it may be neces-
sary to move the machine within the area specified.
A gap of 100 mm is required at the rear of the IOT for airflow to the fans. This is also be suffi-
cient for the DADH when raised.
Figure 2 Represents a plan view of a machine installation and is to be read in conjunction with
Table 2. The dimensions A and B outline a footprint of the machine within the boundary of safe
operation, dimensions C and D. The dimension E indicates the area required for airflow / work-
space at the rear of the machine.
General Procedures & Information
August 2007
GP 21
WorkCentre 5687 Family 6-51