Toyota Celica 2005 Repair Manual page 1003

DI−802
INSPECTION PROCEDURE
1 Check speed sensor (NT) installation.
OK
OK
2 Check speed sensor (NT) .
OK
3 Check harness and connector between ECM and speed sensor (NT)
(See page IN−30).
OK
Check and replace the ECM (See page
IN−30).
2005 CELICA (RM1131U)
DIAGNOSTICS
CHECK:
Check the speed sensor installation.
OK:
The installation bolt is tightened properly and there is
no clearance between the sensor and transaxle case.
NG
NG
BR3795
PREPARATION:
Remove the NT speed sensor from transaxle.
CHECK:
Measure resistance between terminals 1 and 2 of speed sen-
sor.
OK:
Resistance: 620 ± 60 Ω at 20 °C (68 °F)
NG
D13642
NG
1002
− AUTOMATIC TRANSAXLE (U341E)
Tighten the speed sensor (NT) properly.
speed sensor (NT)
Replace the
Repair or replace harness and connector.
.