Ip Dhcp Ping Packets - Dell Networking 2024 Reference Manual

high-address —An IPv4 address indicating the ending range for exclusion
•
from automatic DHCP address assignment. The high-address must be
numerically greater than the low-address.
Default Configuration
By default, no IP addresses are excluded from the lists configured by the IP
DHCP pool configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console#ip dhcp excluded-address 192.168.20.1 192.168.20.3

ip dhcp ping packets

Use the ip dhcp ping packets command in Global Configuration mode to
configure the number of pings sent to detect if an address is in use prior to
assigning an address from the DHCP pool. If neither ping is answered, the
DHCP server presumes the address is not in use and assigns the selected IP
address.
Syntax
ip dhcp ping packets {0,
no ip dhcp ping packets
• count —
The number of ping packets sent to detect an address in use. The
default is 2 packets. Range 0, 2-10. A value of 0 turns off address detection. Use
the no form of the command to return the setting to the default value.
Default Configuration
The command has no default configuration.
944
DHCP Server and Relay Agent Commands
2-10
}