System Configuration Example - YASKAWA SVC User Manual

2.3 System Configuration Example

2.3

System Configuration Example

The following figure shows a system configuration example that uses the Motion Control Func-
tion Module.
 Configuration with the MP3200
The following figure shows a system configuration example that uses the SVC32.
24-VDC power supply,
AC power supply, or
status monitoring device
24-VDC power supply
or AC power supply
24-VDC power supply
or AC power supply
24-VDC power supply
or AC power supply
24-VDC power supply
or AC power supply
*
This manual primarily describes this area.
Note: 1. Refer to the following manual for information on cables, connectors, and applicable SERVOPACKs.
2. When you connect a SERVOPACK through MECHATROLINK communications, connect the wiring for input
2-12
Host PLC
Ethernet
MP3200
DC
DC
MP3000 Series MP3200 User's Manual (Manual No.: SIEP C880725 10)
signals, such as overtravel, the zero point return deceleration limit switch, and external latches, to the SER-
VOPACK. Refer to the relevant SERVOPACK manual for details on the connections.
*
MPE720 Integrated
Engineering Tool Version 7
PC
Ethernet
MECHATROLINK-III
SERVOPACK with
MECHATROLINK-III Communications
References
Servomotor
Up to 42 stations, including I/O (Up to 32 stations can be Servos.)
I/O Module with
MECHATROLINK-III
Communications
I/O
Servomotor Servomotor