Module Configuration Settings; Settings For Motion Control Function Modules - YASKAWA SVC User Manual

7.1 Module Configuration Settings

7.1.1 Settings for Motion Control Function Modules

7.1

Module Configuration Settings

You must confirm information and make settings for the Motion Control Function Module before
you perform motion control.
This section describes how to use the MPE720 Version 7 Engineering Tool to confirm informa-
tion and make settings for the Motion Control Function Module.
7.1.1

Settings for Motion Control Function Modules

You can confirm information for your Motion Control Function Module on the Module Configu-
ration Definition Tab Page of the MPE720.
This section describes how to display the Module Configuration Definition Tab Page and
describes its contents.
Displaying the Module Configuration Definition Tab Page
Use the following procedure to display the Module Configuration Definition Tab Page.
1.
Connect the MP3000 to the computer, and start the MPE720.
Refer to the following manual for details on how to start the MPE720.
2.
Open the required project file.
Click the Module Configuration Icon on the Start Tab Page.
3.
The following Module Configuration Definition Tab Page is displayed.
This concludes the procedure for displaying the Module Configuration Definition Tab Page.
7-2
MP3000 Series Machine Controller Setup Manual (Manual No.: SIEP C880725 00)
SVC32 setting
cells
SVR32 setting
cells