2.1.4
External Appearance and Indicators
External Appearance
The following figure shows the indicators and connectors that are related to the SVC32.
Indicators
The following table describes the indicators that show the operating status of the SVC32 and
error information.
Indicator
CN
LK1
LK2
Indicator
Color
Name
MECHATROLINK-III communications are established as a
CN
Green
slave (i.e., the CONNECT command is ON).
LK1
Green
Port 1 is performing MECHATROLINK-III communications.
LK2
Green
Port 2 is performing MECHATROLINK-III communications.
2.1.4 External Appearance and Indicators
Indicators (LEDs)
MECHATROLINK-III connector CN1
MECHATROLINK-III connector CN2
Meaning When Lit
2.1 Overview
2
2-5